All Artifactory configuration files are located under the $JFROG_HOME/artifactory/var/etc/artifactory
folder.
The following configuration files are available in Artifactory.
Global Configuration Descriptor
The global Artifactory configuration file is used to provide a default set of configuration parameters.
The Global Configuration Descriptor file is located in $JFROG_HOME/artifactory/var/etc/artifactory/artifactory.config.xml
and is loaded by Artifactory at initial startup. Once the file is loaded, Artifactory renames it to artifactory.config.bootstrap.xml
and from that point on, the configuration is stored internally in Artifactory's storage. This ensures Artifactory's configuration and data are coherently stored in one place making it easier to back up and move Artifactory when using direct database backups. On every startup, Artifactory also writes its current configuration to $JFROG_HOME/artifactory/var/etc/artifactory/artifactory.config.latest.xml
as a backup.
At any time, the default configuration can be changed in the Artifactory UI Administration module.
There are two ways to directly modify the Global Configuration Descriptor:
Back Up Before Running Procedure
Direct modification of the global configuration descriptor is an advanced feature, and if done incorrectly may render Artifactory in an undefined and unusable state. We strongly recommend backing up the configuration before making any direct changes, and taking great care when doing so.
Note
From Artifactory version 7.49.x and forward, the Global Configuration Descriptor file will no longer contain Repository Configuration. You can use the Repositories REST API to modify repositories configuration. For more information, see Repositories REST API.
Modifying Configuration Using the UI
You can access the Global Configuration Descriptor in the Administration module under Artifactory | Advanced | Config Descriptor. There you can modify the file's contents directly or copy the contents from the entry field.
Modifying Configuration Using the REST API
You can retrieve or set the global configuration by sending a GET or POST request to http://<host>:<port>/artifactory/api/system/configuration
. For example:
curl -u admin:password -X GET -H "Accept: application/xml" http://localhost:8081/artifactory/api/system/configuration curl -u admin:password -X POST -H "Content-type:application/xml" --data-binary @artifactory.config.xml http://localhost:8081/artifactory/api/system/configuration
Bootstrapping the Global Configuration
You can bootstrap Artifactory with a predefined global configuration by renaming the $JFROG_HOME/artifactory/var/etc/artifactory/artifactory.config.latest.xml
file containing the Artifactory configuration descriptor to $JFROG_HOME/artifactory/var/etc/artifactory/artifactory.config.import.xml
.
From Artifactory 7.49.3, you would also need to rename the file $JFROG_HOME/artifactory/var/etc/artifactory/artifactory.repository.config.latest.json
to $JFROG_HOME/artifactory/var/etc/artifactory/artifactory.repository.config.import.json
.
If Artifactory detects this file at startup, it uses the information in the file to override its global configuration. This is useful if you want to copy the configuration to another instance of Artifactory.
Security Configuration Descriptor
Security Configuration Descriptor contains Artifactory security configuration information.
Warning
Direct modification of the security descriptor is an advanced feature, and if done incorrectly may render Artifactory in an undefined and unusable state. We strongly recommend backing up the configuration before making any direct changes, and taking great care when doing so.
Bootstrapping the Security Configuration
Artifactory stores all security information as part of its internal storage.You can bootstrap Artifactory with a predefined security configuration by creating a $JFROG_HOME/artifactory/var/etc/artifactory/security.import.xml
file containing the Artifactory exported security configuration information.
If Artifactory detects this file at startup, it uses the information in the file to override all security settings. This is useful if you want to copy the security configuration to another instance of Artifactory.
Modifying Security Using the REST API
Modifying the Security Configuration Descriptor Using the REST API has been deprecated.
Content Type/MIME Type
Artifactory provides a flexible mechanism to manage content type/MIME Type. You can define system-wide MIME types for common usage, but you can also overwrite the MIME types for specific files as needed. You can find the list of default MIME types in $JFROG_HOME/artifactory/var/etc/artifactory/mimetypes.xml
and can be edited in order to add, remove or change MIME types.
If a file has an extension that is not supported by any of the MIME types, or does not have an extension at all, Artifactory will use the default MIME type of application/octet-stream
. To determine an artifact's MIME type, Artifactory compares its extension with the those in the mimetype.xml
file, and applies the MIME type of the first extension that matches.
MIME Type Attributes
Each MIME type have the following attributes.
type | The MIME type unique name (mandatory) |
extensions | A comma separated list of file extensions mapped to this MIME type (mandatory) |
index | True if this MIME type should be indexed for archive searching (valid only for supported archive files) |
archive | True if this MIME type is a browsable archive |
viewable | True if this MIME type can be viewed as a text file inside Artifactory UI |
syntax | The UI highlighter syntax to for this MIME type (only relevant if this is a |
css | The css class of a display icon for this mime type |
The following example shows a mimetype.xml file.
<mimetypes version="4"> <mimetype type="text/plain" extensions="txt, properties, mf, asc" viewable="true" syntax="plain"/> <mimetype type="text/html" extensions="htm, html" viewable="true" syntax="xml"/> <mimetype type="text/css" extensions="css" viewable="true" syntax="css"/> <mimetype type="text/xsl" extensions="xsl" viewable="true" syntax="xml"/> <mimetype type="text/xslt" extensions="xslt" viewable="true" syntax="xml"/> <mimetype type="text/x-java-source" extensions="java" viewable="true" syntax="java"/> <mimetype type="text/x-javafx-source" extensions="fx" viewable="true" syntax="javafx"/> </mimetypes>
For the example, from the extensions parameter in the above mimtypes.xml file sample we can conclude that:
test.properties is a text/plain
MIME typetest.css
is atext/css
MIME typetest.doc
is anapplication/octet-stream
MIME type sincedoc
is not included in any of the other MIME types.
Make sure you restart Artifactory for your changes to take affect.
Artifactory MIME Types
Some of the Mime-Types specified in mimetypes.xml (e.g. application/x-checksum)
are used by Artifactory. Great care should be taken before changing these Mime-Types to ensure Artifactory continues to function correctly.
Setting Content-Type During Download
Using Artifactory, when downloading files you can override the Content-Type
HTTP header by setting the artifactory.content-type
property. If the artifactory.content-type
property is not explicitly set, Artifactory will use the default mechanism of matching the artifact name extension to the extensions in the mimtypes.xml file
to apply the Content-Type.
This feature is only available with Artifactory Pro.
System Properties
Rather than configuring properties in the JVM runtime configuration of the hosting container, you can edit $JFROG_HOME/artifactory/var/etc/artifactory/artifactory.system.properties
file and restart Artifactory.
The Artifactory system properties are documented within this file.
Since these settings impact the entire container VM, we recommend using this feature primarily for specifying Artifactory-related properties only (such as changing the database used by Artifactory, etc.).
Note
Setting properties in artifactory.system.properties
is an advanced feature and is typically not required.
Do not confuse these setting with those in the $JFROG_HOME/artifactory/var/data/artifactory/artifactory.properties
file, which are for internal use.
Storage Properties
Artifactory provides you with a binarystore.xml
file so that you can configure the specific storage solution used in your system. For more information, see Configuring the Filestore.